Welding positioner is used for the special structure, construction machinery,smalll round workpiece,wind tower piece and so on.
1. The turning device is made up of a motor, a speed reducer and a swing set.
2. Frequency conversion and speed regulation is used for speed change.
3. Stepless speed regulation, easy control and cheap maintenance.
4. The overturn device is mainly made up of an electric motor, cycloidal gear speed reducer, worm wheel speed reducer, semicircular gear.
5. Either end of the output shaft of the overturn device is installed with a semicircular gear.
6. One end of the electric conduction device is connected to the swing set while the other end has an electric conducting shaft. It is directly propped to the working table, allowing the welding current to be directly transmitted from the working table.
7. The stander is of a box structure, allowing high loading capacity. It is made of Q235-A steel with annealing and finish machining to eliminate the welding stress deformation.
|
Model |
HBJ-01 |
HBJ-03 |
HBJ-06 |
HJB-12 |
HBJ-30 |
HBJ-50 |
HBJ-100 |
|
|
Rated load capacity (kg) |
100 |
300 |
600 |
1200 |
3000 |
5000 |
10000 |
|
|
Turning speed(rpm) |
0.4-4 |
0.1-1 |
0.09-0.9 |
0.05-0.5 |
0.05-0.5 |
0.05-0.5 |
0.05-0.2 |
|
|
Overturn speed(rpm) |
handle |
1.1 |
0.67 |
0.23 |
0.14 |
0.14 |
||
|
Diameter of working table(mm) |
￠400 |
￠600 |
￠1000 |
￠1200 |
￠1400 |
￠1500 |
￠2000 |
|
|
Turning angle (°) |
0-120 |
0-90 |
0-90 |
0-120 |
||||
|
Motor power (KW) |
Turning |
0.06 |
0.37 |
0.75 |
1.1 |
1.5 |
3 |
5.5 |
|
Overturning |
|
|
0.75 |
2.2 |
1.5 |
3 |
5.5 |
|
|
Speed regulation Type |
Stepless frequency conversion |
|||||||
|
Max gravity distance(mm) |
100 |
100 |
100 |
150 |
200 |
300 |
400 |
|
|
Max eccentricity (mm) |
150 |
150 |
150 |
200 |
200 |
300 |
400 |
|
|
Max rotating diameter when 90° overturned (mm) |
￠600 |
￠800 |
￠1500 |
￠2050 |
￠2100 |
￠2500 |
￠3240 |
|
